Wearing a shirt with a team or company logo on it is a fun way to express loyalty to both. However, there are situations when you might want to take a logo off of a shirt. Perhaps you prefer a more understated style or you have other plans for the shirt.
For whatever reason, removing a logo from a garment can be a challenge if you haven’t practiced the appropriate methods. We’ll talk about how to remove logo from shirt and go over some tried-and-true strategies for taking out unwanted logos from shirts without compromising their quality.
1- Screen Print Logo
Typically, a stencil and ink are used to create a screen printed logo. Using rubbing alcohol or nail polish remover is the quickest approach to get rid of this emblem. A cotton ball dipped in the solution can be used to gently wipe the logo clean. Baking soda and water can also be used to make a paste for this purpose.
Method 1: Rubbing Alcohol or Nail Polish Remover
Rubbing alcohol or nail polish remover contains acetone, which helps to break down the ink of the screen print logo. However, this method may not work on all types of fabric and can also cause discoloration or damage. It is recommended to test a small area first before attempting to remove the logo. Here’s how to use this method:
Step 1: Apply rubbing alcohol or nail polish remover to a cotton ball.
Step 2: Rub the cotton ball over the logo until it starts to fade away.
Step 3: Repeat the process until the logo is completely removed.
Method 2: Baking Soda and Water Paste
Baking soda and water create an abrasive paste that helps to scrub off the screen print logo. This method is more gentle on fabrics than using rubbing alcohol or nail polish remover. Here’s how to use this method:
Step 1: Mix baking soda and water to create a paste.
Step 2: Apply the paste to the logo.
Step 3: Gently rub the paste into the logo using a soft-bristled toothbrush.
Step 4: Rinse the shirt with water and repeat the process if necessary.
Related: 8 Best Methods to remove Screen Printing.
2- Embroidery Logo
When a logo is embroidered, it is sewn into the fabric with thread. The permanence of these labels makes it more of a hassle to get rid of them. Carefully removing the embroidery with a pair of sharp scissors is one option. Alternatively, you might use a seam ripper to carefully cut out each embroidered thread.
Method 1: Scissors
This method is best for small embroidery logos. Use sharp scissors to carefully cut out the embroidery around the logo. Be careful not to cut the fabric of the shirt. Here’s how to use this method:
Step 1: Use sharp scissors to carefully cut out the embroidery around the logo.
Step 2: Pull the remaining threads of the logo out using a pair of tweezers.
Also Read: How long Does Sublimation Ink Last?
Method 2: Seam Ripper
This method is best for larger embroidery logos. Use a seam ripper to carefully remove the threads of the embroidery around the logo. Be careful not to cut the fabric of the shirt. Here’s how to use this method:
Step 1: Use a seam ripper to carefully remove the threads of the embroidery around the logo.
Step 2: Pull out any remaining threads of the logo using a pair of tweezers.
3- Logo Stuck with Glue
Using a hot iron can remove glue-based logos from the garment. Cover the logo with the fabric and iron it for a few seconds until the cloth is melted. When you do this, the adhesive will weaken and peel off much more easily. It’s best to use a knife or tweezers to carefully remove the logo.
Method: Hot Iron
This method works by heating up the glue holding the logo to the shirt. Be careful not to scorch or burn the fabric of the shirt. Here’s how to use this method:
Step 1: Place a cloth over the logo.
Step 2: Heat up an iron to a hot temperature.
Step 3: Place the hot iron on top of the cloth covering the logo for a few seconds.
Step 4: Remove the iron and cloth.
Step 5: Use a knife or tweezers to carefully peel off the logo.
Related Article: How to Remove Sublimation ink from Shirts, Tumblers and Mugs?
4- Logo Stuck with Heat Press
Heat press logos are applied to fabric using heat and pressure. To remove this type of logo, use a heat gun or a hair drier to weaken the glue. When the adhesive has softened, carefully peel off the logo using a knife or tweezers.
Method: Heat Gun or Hair Dryer
This method works by heating up the heat press logo to soften the adhesive. Be careful not to scorch or melt the fabric of the shirt. Here’s how to use this method:
Step 1: Use a heat gun or hair dryer to heat up the logo.
Step 2: Once the adhesive is soft, use a knife or tweezers to carefully peel off the logo.
5- Sublimated Logo
Heat transfer is used to print sublimated patterns onto the fabric. Use rubbing alcohol or nail paint remover on a cotton ball and rub it over the logo to get rid of this kind of logo. You can also make a paste out of baking soda and water and use a soft-bristled toothbrush to rub it over the mark.
Method 1: Rubbing Alcohol or Nail Polish Remover
Rubbing alcohol or nail polish remover contains acetone, which helps to break down the ink of the sublimated logo. However, this method may not work on all types of fabric and can also cause discoloration or damage. It is recommended to test a small area first before attempting to remove the logo. Here’s how to
Method 2: Bleach
Bleach can be used to remove sublimated logos from white shirts. However, it can damage colored shirts and should only be used on white shirts. Here’s how to use this method:
Step 1: Dilute bleach with water according to the instructions on the bottle.
Step 2: Apply the bleach solution to the logo.
Step 3: Let it sit for a few minutes.
Step 4: Rinse the shirt with water.
Step 5: Repeat the process if necessary.
Also Read: 7 Most Effective Ways to Remove Sublimation ink.
Method 3: Lemon Juice and Sunlight
This method is gentle and safe for most fabrics. The acidic properties of lemon juice and the UV rays from the sun help to break down the ink of the sublimated logo. Here’s how to use this method:
Step 1: Squeeze fresh lemon juice onto the logo.
Step 2: Place the shirt outside in direct sunlight.
Step 3: Let the shirt sit in the sun for a few hours.
Step 4: Rinse the shirt with water.
Step 5: Repeat the process if necessary.
You May Like: How to wash Sublimation Shirts? A Complete guide
What should I avoid when removing a logo from a shirt?
It’s crucial to be careful while removing a logo from a shirt so as not to ruin the fabric or leave a sticky residue. The following should be avoided:
- Abrasive materials: Scratches and wear can be caused by using abrasive materials on the cloth, such as steel wool or a rough brush.
- Extreme heat: Ironing on a logo could melt the ink or adhesive and ruin the cloth.
- Harsh chemicals: Bleach and acetone are examples of harsh chemicals that can ruin cloth and discolor it.
- Rough handling: Damage to the logo or holes in the fabric may result from rough handling.
- Not testing a small area first: A tiny, inconspicuous section of the garment should be tested to ensure that the process won’t damage the fabric or leave residue before attempting to remove a logo.
Check out this tutorial:
Frequently Asked Questions
Q: How to remove Printed logo from Jacket?
Applying rubbing alcohol or nail polish remover on the logo will help get rid of it if it’s printed on the jacket. These chemicals may assist to break down the logo’s ink, making it less permanent and simpler to remove. To make sure the chemical won’t ruin the jacket’s fabric, though, it should be tested on a small, hidden spot first. In addition, take care not to rip or tear the jacket while you remove the logo.
Q: How to remove Rubber logos from Clothes ?
The adhesive used to attach rubber logos to clothing can be loosened with a hair drier or heat gun. Once the glue has softened, the emblem can be taken off easily. To avoid burning holes in the fabric, iron on a low level and take your time. You can also use rubbing alcohol or a solution of dish detergent and warm water to get rid of any leftover glue.
Q: Is it possible to remove a screen-printed logo from a shirt without leaving any residue?
Depending on the technology employed and the ink used in the screen printing process, it is feasible to remove a screen-printed logo from a garment without leaving any residue. It’s possible that repeated attempts to clean off some inks will still leave behind a trace. However, if you take your time and use a mild approach (such rubbing alcohol or dish soap and warm water), you can reduce the amount of residue that remains.
Conclusion
In conclusion, removing logos from t-shirts can be done in a number of different ways, the most effective of which will vary from logo to logo and fabric to fabric. Different methods must be used to safely remove logos that have been screen printed, embroidered, heat pressed, or bonded. Before attempting to remove the logo, it is vital to take care and test a tiny section of the shirt to ensure that the fabric will not be damaged.
